Inglesina otutto, User Manual

Page: 29 / 64

29
EN
LIST OF COMPONENTS
Frame
fig. 1
T1
'SPOUXIFFMBTTFNCMZ
T2 3FBSXIFFMBTTFNCMZ
T3 Feeding bottle holding unit
T4 Storage basket
Carrycot
fig. 2
C1
$BSSZDPUIPPE
C2 $BSSZDPUCMBOLFU
Transport Seat | Car seat
fig. 3
R1
Handrail
R2 Transport seat hood
S
)VHHZDBSTFBU
FRAME
ASSEMBLY/REMOVAL OF REAR WHEEL ASSEMBLY
fig. 4
*OTFSUUIFXIFFMBTTFNCMZPOUIFSFBSQJQF
fig. 5 Hook the ring ( T5 ) on the bracket ( T6 ); then, press the
lever ( T7 ) until its complete hooking, making sure that the
ring ( T5 JTQSPQFSMZQPTJUJPOFEJOJUTTFBU
CAUTION: make sure that the wheels are properly hoo-
ked before use.
fig. 6
5PSFNPWFUIFSFBSXIFFMBTTFNCMZMJGUUIFMFWFS
T7 )
and unhook the ring ( T5 ) from the bracket ( T6 ), until it is
DPNQMFUFMZGSFF
ASSEMBLING THE FRONT WHEEL ASSEMBLY
fig. 7
$MJQGSPOUXIFFMTVOUJMZPVIFBSB$-*$,
WARNING: be sure that wheels are correctly linked before
use.
FRAME OPENING
fig. 8
(SJQQJOHUIFGSBNFCZUIFIBOEMFTMJGUUIFMFWFS T8 ).
fig. 9 Pulling the handle towards the user, the frame opens
BVUPNBUJDBMMZ
fig. 10 $PNQMFUF UIF PQFOJOH CZ QVTIJOH XJUI UIF GPPU PO
the rear footboard until hearing a CLICK.
fig. 11 Make sure that all closure mechanisms are pro-
perly locked on both sides before use.
FRAME CLOSING
fig. 12
Press button (T9 ) and lift the handle.
fig. 13 Pulling the handle upwards the frame closes automa-
UJDBMMZ
fig. 14 Be sure the lever ( T8
JTQSPQFSMZMJOLFEUPUIFDFOUSBM
joint.
ADJUSTMENT OF THE HANDLE
fig. 15
The frame is equipped with an adjustable unit handle.
5PBEKVTUJUQSFTTTJNVMUBOFPVTMZUIFTJEFCVUUPOT T10 ) till
the wished position.
BRAKES
fig. 16
To engage the brake, push downwards the lever ( T11 )
QPTJUJPOFEPOUIFSJHIUSFBSXIFFMTBTTFNCMZ
Always engage the brake during stops.
SWIVEL WHEELS
fig. 17
Operate both levers ( T12 ) with the foot.
STEP-SKIPPING KIT
fig. 18
Operate the rear footboard with the foot to skip small
obstacles.
STORAGE BASKET
fig. 19
Insert the basket buttonhole on the support and fas-
ten all the press studs.
CAUTION: Maximum allowed load: 3 kg.
FEEDING BOTTLE HOLDING UNIT
fig. 20
Hook the feeding bottle holding unit ( T3 ) to the
GSBNFBOENBLFTVSFJUJTQSPQFSMZJOJUTTFBU
CARRYCOT
FITTING THE CARRYCOT TO THE FRAME
fig. 21
5IF 056550 DBSSZDPU öUT UIF GSBNF UIBOLT UP UIF
&"4: $-*1 QBUFOUFE TZTUFN $PSSFDUMZ QPTJUJPO UIF DBSSZDPU
on the frame until hearing a CLICK.
CAUTION: make sure that the carrycot is always firmly
engaged before use.
RELEASING THE CARRYCOT FROM THE FRAME
fig. 22
Act on the lever ( C3 QPTJUJPOFEFYUFSOBMMZPOUIFGFFU
TJEFBOETJNVMUBOFPVTMZMJGUUIFDBSSZDPUCZIPMEJOHJUGSPN
the handle.
FITTING THE HOOD
fig. 23
)PPLUIFQSFTTTUVETPOUIFDBSSZDPUTUSVDUVSF
fig. 24 Wrap the hood around the handle fastening it using
the suitable press studs.
HANDLE AND HOOD ADJUSTMENT
fig. 25
To adjust the handle and the hood act on the two la-
UFSBMCVUUPOTJNVMUBOFPVTMZ
fig. 26 5IF IPPE JT FRVJQQFE XJUI B OFU UIBU BMXBZT BMMPXT
ZPVSCBCZTWJFX
FITTING THE COVER
fig. 27
'BTUFOBMMUIFDPWFSQSFTTTUVETUPUIFDBSSZDPU
INTERNAL VENTILATION
fig. 28
*UJTQPTTJCMFUPBEKVTUJOUFSOBMWFOUJMBUJPOCZVTJOHUIF
lever ( C4 ).
REMOVING THE LINING
fig. 29
It is possible to remove the lining as shown in the fi-
gure.
BACKREST ADJUSTMENT
fig. 30
Operate the lever ( C5 ) to adjust the backrest: once the
desired position is reached, set the lever to the starting posi-
tion.
SEAT UNIT
FITTING THE SEAT UNIT TO THE FRAME
fig. 31
The OTUTTO seat unit fits the frame thanks to the
&"4: $-*1 QBUFOUFE TZTUFN QPTJUJPO UIF TFBU VOJU PO UIF
frame until hearing a CLICK.
CAUTION: make sure that the seat unit is always firmly
engaged before use.
SEAT UNIT FACING THE MUM OR THE STREET
fig. 32
It is possible to use the seat unit facing the mum or
the street, and fold the frame with the seat unit fitted in.
INSTRUCTIONS