Ingersoll-Rand UP5S 11, Installation, Operation And Maintenance Manual

Page: 22 / 156

80448418 Rev.C
Page 7 – Analog Outputs
Figure 27 : Analog inputs
Analog Outputs ( Not available on this compressor
model) :
The value for the analog outputs will be in mA��
VSD Blower Output – Current speed of the VSD
blower (if installed)��
Page 8 – CT Inputs
Figure 28 : CT Inputs
CT Inputs
Displays the mA value of the current transformers
installed on each leg of the motor incoming power
CT1
CT2
CT3
FACTORY SETTINGS FOLDER
This folder is for Ingersoll Rand factory and service
personnel�� A password must be entered on page one in
order to adjust values in this folder�� This folder is used for
setting parameters that are specific to that compressor
and displaying software information for the controller��
Page 1 – Password
Figure 29 : Password
•
•
•
•

Password:
Provides access to enter a valid password to gain access
to password protected parameters�� The password is
entered by scrolling down to the password value and
pressing the return key��
Password entered:
This checkbox will indicate a valid password has been
entered�� If this checkbox is blank, a valid password has
not been entered or it has timed out�� This is read only��
Password timeout enable:
Checking this box will enable the password time feature��
Password timeout:
This timeout along with the password timeout enable
allows the user to set an adjustable amount of time
to require a valid password to be re-entered�� Once
this timeout is reached re-entry of a valid password is
required�� The timeout counter is reset after any button
press��
Pages 2 Thru 6 – Factory Settings
Figure 30 : Factory settings
OPERATING INSTRUCTIONS (XE-70M CONTROLLER)
RELEASED 20/Jul/2016 17:56:55 GMT