Ingersoll-Rand R110IU-10, Manual

Page: 37 / 79

37
Setup Display
-
The Setup Display is entered by pressing the Menu button while the compressor is
not running mode. The Setup display can be exited by pressing the Clear button. A security code of 0
0 0 0 will be required to enter the Setup Display.
CD: 0 0 0 0 Pass Code
If no buttons are pressed within 30 seconds, the display will revert back to the default Status display
item.
Un
: 0 0 0 0 PSI Unload Pressure -------------------------------------------
Ld
: 0 0 0 0 PSI Load Pressure --------------------------------------------
As
: 0 0 0 0 SEC Unloaded Run Timer ------------------------------
Md
: _ _ _ _ On_ Modulation On/Off ------------------------------------------
Eu
: _ _ _ _ _°C Engineering Units
Dt
: 0 0.0 0 _00 Current Date
Tm
: 0 0:0 0 _ _ _ Current Time ------------------------------------------
Setup screen Data in Yellow will only be changeable in an ENH controller. The data will be viewable
in a STD controller.