Ingersoll-Rand R110IU-10, Manual

Page: 36 / 79

36
PORO Active
I(Arrow to point to the left)
Scheduled Start / Stop Active
Pressing the Up and Down arrow buttons will toggle through the following items to be displayed in the
Multi-use display area. If no buttons are pressed within 30 seconds, the display should revert back to
the default display item. Package Discharge Pressure with Units should be continuously displayed for
all Status and Setup displays.
Satus screen Data in Yellow will only be displayed is ENH
Default Ae: 0 0 0 0 °C Airend Discharge Temp
(1)
Ip
: 0 0 0 0 PSI Sump Pressure
(2)
DL
: 0 0 0 0 PSI Delta pressure DL will not be displayed while running unloaded
(3)
Rn
: _ _ _ _ 000 Run Hours ------------------------------------------
(4)
Ld
: _ _ _ _ 000 Load Hours -------------------------------------------
(5)
Mn
_ _ _ _ 000 Maintenance Hours (before Maintenance due) -
(6)
Mn
_ _ _._ Maintenance % (% of hours before Maint due) ---------------
(7)
IS
_ _ _ _ Displays the number of hours before Sequencing occurs if IS is enabled
Setup screen Data in Yellow will only be changeable in an ENH controller. The data will be viewable
in a STD controller.