18
Caution:
The unit’s voltage is displayed on the rating
plate.
Make sure that the unit’s voltage matches the
power supply voltage at site.
5. Install the control panel and (any optional)
connections to external controls.
6. Complete the installation of the unit.
7. Switch the power supply on and check that
the unit is working properly.
General instructions
Some parts of this section only apply to
certain models. Where this is the case, it will
be indicated. If no specific model is
referenced, then the instruction applies to all
models.
Note:
Make sure that you perform all installation
operations that are applicable to your unit.
Check the rating plate and consult the manual
if in doubt about the model or type of your unit.
Note:
During the installation protect the unit against
damage and penetration of dust, cement, etc.
Use the packaging or temporary plastic
sheeting for protection.
c
n
n
Summary of Contents for SchwankAir 3500 Series
Page 108: ...108 ...
