63
4.5
Settings
The
Settings
menu allows you to enter settings which
influence the day-to-day operation of the unit.
1. Select modes
The control panel has an automatic mode and a
manual mode. With the function Select modes, you can
set which of these modes can be selected in the
HOME screen.
5.
Room temperature
Here, set the temperature which is to be used by
default as the room temperature when starting up the
unit.
The desired room temperature can temporarily be
adjusted on the home screen until the next start-up
moment.
6.
Minimum air temperature
Set the minimum differential between the room
temperature and the discharge temperature.
Increase the differential for more comfort. A smaller
differential saves energy.
8.
Night temperature
The night temperature is used when the unit is switched
off. When the room temperature drops below this set
value, the unit will start working in order to keep the
room at the night temperature.
Note:
This function only operates when the heating is
switched on.
Warning:
Be aware that the airflow of the unit can set
objects in motion. This might set off an
alarm system in the building at night.
9.
Calibration
An unfavorable location of the room sensor or use of
the temperature sensor in the unit may be the reason
why the displayed temperature deviates from the actual
temperature.
Use this function to adjust the temperature reading.
n
w
Summary of Contents for SchwankAir 3500 Series
Page 108: ...108 ...
