7
The automatic CHIPS control
Water heated models only are equipped with an
automatic CHIPS control when the B-touch controller
option is ordered. (See also section
1.4.2 Operating
package
)
CHIPS stands for “Corrective Heat and Impulse
Prediction System”.
The CHIPS control automatically adjusts the air flow
strength and heat of the unit to changing weather
conditions. In all conditions the energy loss is
minimized and comfort maximized.
Control when unit ‘ON’
The unit and the automatic control were developed for
situations in which the door remains open.
For the most efficient climate separation and
preservation of comfort it is important that the airflow
just touches the floor and is heated sufficiently. The
unit continuously measures the values that are
needed in order to achieve this:
1. The installation height (entered in the control
panel).
2. The temperature difference between the two
rooms:
outdoor temperature
room temperature
3. The temperature of the discharged air.
As soon as conditions change, the control adjusts
the outlet flow rate and the temperature of the air
flow.
Control with unit ‘OFF’
If the unit is off (at night, for example) it is not active
as climate separation.
If it is off, the unit can still perform other functions:
The unit can be set to keep the room at a
minimal ‘night’ temperature.
Water-heated models are equipped with
integrated frost protection.
Summary of Contents for SchwankAir 3500 Series
Page 108: ...108 ...
