58
The unit can also be switched ON and OFF other ways:
Using external controls (see function
65. Control
panel input
and
60. Function of inputs
).
Via the internal timer or via an external release
signal on the unit.
In these cases, the ON/OFF button can be hidden
via:
Configuration > 21. User interface options >
Display on/off button
.
4.2.3 The CHIPS control
By default, the unit operates with fully automatic
control. Depending on the selected settings, the unit
can also be controlled manually. In automatic mode,
the unit operates under CHIPS control. This control
matches the strength and heat of the unit to
changing weather conditions. This reduces energy
consumption and improves comfort through selection
of the optimum setting under all circumstances.
CHIPS stands for “Corrective Heat and Impulse
Prediction System”.The unit works on the basis of
the outdoor temperature and the room temperature
near the air curtain.
4.2.4 Automatic or manual control
The unit has an automatic mode and a manual
mode. You can select these by touching the
uppermost part of the symbol. When the unit is
switched on, it is always in automatic mode. If you
wish to use the unit in manual mode only, switch off
the automatic mode via:
menu > Settings > 1.
Select modes.
In the manual mode, the unit operates with a fixed
set fan speed, possibly influenced by the settings of
function
26. Manual: Door response
.
Recommended setting of the unit
To obtain the maximum possible separation effect
and the greatest possible comfort with the least
possible energy consumption, the use of the fully
automatic CHIPS control is recommended.
Summary of Contents for SchwankAir 3500 Series
Page 108: ...108 ...
