background image

®

預熱器

使用說明書

承蒙惠顧 , 謹致謝忱。

本商品為將電路板等預先加熱之裝置。

請詳閱本使用說明書 , 正確使用。
閱後請妥為收存 , 以備日後查閱。

目錄

 1. 包裝清單及各部名稱 ..............................................11
 2. 規格 .............................................................................11
 3. 安全及使用上之注意事項 ......................................12
 4. 使用方法 ....................................................................13
 5. 選購部件 ....................................................................14
 6. 錯誤顯示 ....................................................................15
 7. 排除故障指南 ...........................................................15
 8. 熱元件、傳感器斷線 , 電阻值之檢查方法 .........16  
 9. 保養 ............................................................................16  
10. 分解圖、部件清單 ..................................................17  
11. 電路圖 ........................................................................18

中 文

English

日本文

®

PREHEATER

Instruction Manual

Thank you for purchasing the HAKKO FR-820 Preheater.

Please read this manual before operating the HAKKO FR-820.

Keep this manual readily accessible for reference.

TABLE OF CONTENTS

 1. PACKING LIST & PART NAMES ................... 20

 2. SPECIFICATIONS ......................................... 20

 3. WARNINGS, CAUTIONS, AND NOTES ....... 21

 4. OPERATION .................................................. 22

 5. OPTIONS ...................................................... 23

 6. ERRO INDICATION ....................................... 24

 7. TROUBLESHOOTING .................................. 24

 8. HEATER/SENSOR INSPECTION ................. 25  

 9. MAINTENANCE ............................................ 25

10. PARTS LIST ................................................. 26

11. WIRING DIAGRAM ....................................... 27

中 文

English

日本文

Summary of Contents for FR-820











Reviews: