EonNAS Pro 500 / 800 Hardware Manual
24
3.1.1 Powering-on EonNAS Pro For the First Time
Press the power button
on the front panel to turn EonNAS Pro.
When powered on, the power button
should illuminate blue; the system status
LED
should remain off to indicate the system is in normal operation; the hard
drive LED
should also remain off at this point; the Ethernet 1 & 2 LEDs
should light up (flashing) if a connection has been established.
SEL ECT
ENTER
EonNAS
S y s t e m b o o t i n g . .
Approx. 3 minutes later, a “Quick Initialize” screen will appear with the arrow pointed at
“Yes”. You may press the SELECT button to bring the cursor from “Yes” to “No” if you
wish to setup your EonNAS system manually (please refer to the Web-Interface
Manual). To continue with the Quick Initialize procedure, press the ENTER button with
the arrow pointed at “Yes” to continue. The following LEDs will light up.
SELECT
ENTER
EonNAS
Q u i c k I n i t i a l i z e
Y e s
N o
->
During the initialization process, the LCD will show “Initializing..”
SELECT
ENT ER
EonNAS
I n i t i a l i z i n g . . .
