EonNAS Pro 500 / 800 Hardware Manual
21
4. With the tray bezel open, insert the hard drive and tray into the system enclosure.
5. Close the tray bezel.
6. Use the small flat blade screwdriver to turn the bezel lock from the unlock to lock
position.
7. Repeat steps 2 ~ 6 to install other hard drives.
8. Always close the system front panel when you are done installing hard drives.
NOTE
When hot-swapping (while system is in operation), a beep will sound to indicate the
hard drive has been detected by the system followed by the
lighting
up green.
