InfiRay Outdoor
•
Tube TH35/TH50
•
Operating Manual www.infirayoutdoor.com
All rights reserved and shall not be copied and distributed in any form without written permission
update when turning on
InfiRay Outdoor.
You can download the
update first via mobile Wi-Fi and then connect the riflescope with mobile
device to finish the update.
⚫
After finishing the update, the device will root.
23
Technical Inspection
It is recommended to carry out a technical inspection each time before
using the riflescope. Check the following:
●
The riflescope appearance (there should be no cracks on the body).
●
The condition of the object lens and eyepiece (there should be no
cracks, greasy spots, dirt or other deposits).
●
The state of rechargeable battery (it should be charged).
●
The controls/buttons should be in working order.
24
Maintenance
The maintenance should be carried out at least twice a year and includes
the following steps:
●
Wipe the external surface of metal and plastic parts off dust with a
cotton cloth. Silicone grease may be used for cleaning process.
●
Clean the electric contacts and battery slots on the riflescope using a
non-greasy organic solvent.
●
Check the optics of the lens and the eyepiece. If necessary, remove the
dirt and sand from the optics (it is perfect to use a non-contact method).
Cleaning of the exterior of the optics should be done with cleaners
designed especially for this purpose.
25
Troubleshooting
The table below lists all the problems that may occur when operating the
riflescope. Carry out the recommended checks and troubleshooting steps
in the order shown in the table. If there are defects that are not listed in the
table or it is impossible to repair the defect yourself, return the riflescope
for repair service.
