InfiRay Outdoor
•
Tube TH35/TH50
•
Operating Manual www.infirayoutdoor.com
All rights reserved and shall not be copied and distributed in any form without written permission
7
Power Supply
The Tube series adopts a dual power system (built-in chargeable Lithium-
ion battery pack and a replaceable 18500 battery). The normal working
time of the dual power supply system can be up to 10 hours. Also, Tube
series can support the USB power supply.
Please notice that the battery should be fully charged before first use.
Charging the Built-in Battery
During use, if the
built-in
battery icon turns into
, it indicates that
the battery level is low. Please charge the battery in time to avoid
reducing the service life of the
device due to over discharge of
the battery.
⚫
Rotate the USB cover
(8)
counterclockwise and
remove it.
⚫
connect the Type-C end of
the attached data cable
(15)
to the Type-C port
(9)
on the
Tube series.
⚫
Connect the other end of the data cable
(15)
to the USB port on the
power adapter
(16).
Plug the adapter
(16)
into a 100-240V power
socket
(17)
for charging.
⚫
During charging, a charging icon
appears on the right of the
battery icon, and the LED indicator on the device is red. When the
indicator turns green, it indicates that charging is complete.
Note:
The USB port can only be used for charging the built-in battery
pack.
Installing 18500 battery
⚫
Turn the battery cover
(11)
counterclockwise and
remove it.
⚫
Install the 18500 battery
(12)
into the battery
compartment along the
special label in the battery compartment designed for it, that is, the
positive pole faces inward and the negative pole faces outward.
⚫
Close and tighten the battery cover
(11)
by turning it clockwise.
Switching between the two batteries
