InfiRay Outdoor
•
Tube TH35/TH50
•
Operating Manual www.infirayoutdoor.com
All rights reserved and shall not be copied and distributed in any form without written permission
the red mark × in the figure on
the right is the position of the
point of impact (This mark is
only for illustration. It should
actually be a bullet hole).
⚫
If the impact point does not
match with the aiming point (the
center of the riflescope reticle),
keep the aiming position still,
and meanwhile, press and hold
the power button
(6)
and the
camera button
(3)
to freeze the
picture, and then a snow-like
freezing icon
appears in
the lower middle of the display.
⚫
Turn the rotary encoder
(7)
to move the reticle, rotate clockwise to
move the cursor left or downward, and rotate anticlockwise to move
the cursor right or upward.
⚫
Press the rotary encoder
(7)
to switch between the X axis and Y axis,
and the position of the shade indicates the currently selected item.
⚫
After moving the reticle, a little white dot appears on the display,
indicating the position of the reticle before moving.
⚫
When the reticle overlaps the actual point of impact, press and hold
the rotary encoder
(7)
to save the current reticle position and return to
the main menu.
⚫
Repeat aiming and shooting, until the position of the point of impact is
consistent with that of the aiming point.
⚫
Press and hold the Brightness Adjustment button and Camera button
simultaneously for 3s to return the reticle center to the position (0,0).
12
Calibration
When the image is degraded or uneven, it can be improved by calibration.
Calibration can balance the background temperature of the detector and
eliminate the defects in the image.
There are two calibration modes: automatic calibration and manual
shutter calibration.
⚫
Automatic calibration:
When the image is degraded or uneven, the
device conducts automatic shutter calibration through software
algorithms.