InfiRay Outdoor
•
Tube TH35/TH50
•
Operating Manual www.infirayoutdoor.com
All rights reserved and shall not be copied and distributed in any form without written permission
Menu-Settings-Units of Measure
for modification.
⚫
Press and hold the brightness button
(4)
to exit this function.
20
Status Auto Hiding
This function is used to automatically hide the GUI information on the
interface other than the reticle, so to make the image unobtrusive.
⚫
Rotate the rotary encoder
(7)
to select
Settings
option in the main menu.
⚫
Press the rotary encoder
(7)
to enter the Settings submenu, and rotate
the rotary encoder
(7)
to select
Status Auto Hiding
option.
⚫
Press the rotary encoder
(7)
to enter the submenu of Status Auto Hiding
option and then select On or Off by rotating the rotary encoder
(7)
.
⚫
After the status auto hiding is enabled, all GUI icons including the status
bar will be automatically hidden and only the image and reticle are
displayed if there is no operation within 8s.
⚫
The GUI information will be displayed again with the press of any button.
⚫
Only after the GUI is displayed, the button and menu can be
manipulated.
21
Wi-Fi
The Tube series has a built-in Wi-Fi module. The device can connect
wirelessly to a mobile apparatus (laptop or smartphone) via Wi-Fi.
⚫
To enable the wireless module, enter the main menu by long pressing
the rotary encoder
(7)
.
⚫
Rotate the rotary encoder
(7)
to select the
Wi-Fi
option.
⚫
Press the rotary encoder
(7)
briefly to turn on/off Wi-Fi module.
⚫
After the Wi-Fi of the scope is enabled, search for the Wi-Fi signal with
the name "Tube_XXXXXX" on the mobile device, of which, XXXXXX is
a 6-bit serial number composed of digits and letters.
⚫
Select the Wi-Fi, enter the password and connect. The initial
password is 12345678.
⚫
When Wi-Fi is successfully connected, you can control the scope via
the mobile app.
Setting Wi-Fi name and password
The Wi-Fi name and password of Tube series can be reset in the
InfiRay
Outdoor
application.
⚫
After connected with the mobile device, find and click the "
Setting
"
icon in the
InfiRay Outdoor
to enter the setting interface.
