18
Side Brush Installation and Removal
To remove the Side Brush
,
use a Philips head screwdriver to remove
the screw in the center of the Side Brush Assembly
by turning it
counter-clockwise.
To install the Side Brush, place the Philips head screw through the
center hole of the Side Brush assembly, and align the screw with the hole
in the slot for the Side Brush. Attach the screw by turning it in a
clockwise direction, until the screw is firmly in place.
Clean Mate 365
QQ-1
Installing Accessories
Scheduler Operations
Installing Accessories
19
Push slide-switch with one hand and
push roller brush with the other hand
toward arrow direction and remove
roller brush for cleaning.
Re-install roller brush:
Roller brush has big head end and small head end.
Push slide-switch with one hand and put big head
end into hole under slide-switch with other hand
then put small head end into other hole and
release slide-switch to lock roller brush.
Roller Brush Installation and Removal
Ensure that the power of the CleanMate is 'Off', and turn the CleanMate
upside down so that the bottom of the unit is facing you.
See Illustration below.
