7
Clean Mate 365
QQ-1
6
Clean Mate 365
QQ-1
QQ3-T Control Panel
Error Indicator
Power On &
Charging Indicator
Operational Time &
MODE Display
Low Battery
Indicator
Ultraviolet
On Indicator
Brush Motor
Off Indicator
T
1. Press “POWER” button on QQ3 to turn it on. The power LED (solid blue)
will light up.
2. Press “Start/Stop” button once on QQ3 unit to start the cleaning. Press
this button again to stop cleaning.
3. Press “TIMER” button on QQ3 unit to set the operation running time.
The numerical panel on QQ3 will display the running time & cleaning
mode. When QQ3 is powered on for the 1st time, default running time is set
to 90 minutes. User can change running time from 10 to 90 minutes in 10-
minute intervals by pressing the TIMER button.
4. Set CleanMate running time based on the size of cleaning area. Regularly
remove the debris and hairs around brushes and wheels to conserve battery
power and increase battery life time.
5. When the battery power is low, the LOW BATT light on QQ3 will blink
in red.
6. In the following situations, ERROR light will light up: battery over
charging, motor overloading, and wheel traction losing (lifted off ground,
etc) for more than 3 seconds.
QQ3-T Control Panel
LED and Audible Alert Indicators
Audible indicator
Status
Description
Long Beep once followed by one Short Beep
Times up (when the cleaning timer was set)
Battery Low, cleaning function off
Long Beep once
Error
Short Beep three times
Fully charged
Short Beep three times and One long Beep
Fully charged and start vacuuming again
(when the docking station is set that after fully
charged, QQ3 will go out to vacuum again)
LED indicator
Color of LED Lights
Description
Green
Steady – Brush Motor Off
Red
Blinking – Battery Low
Steady - Error
Blue
Steady – Fully Charged / Power On
Blinking - Charging
Yellow
UV On
Power on/off
