background image

10.

 

When using rechargeable

 

batteries, please use the correct voltage and 

current listed on the product. If you are not sure about the standard voltage, 
please ask your distributor or query the local electricity company.

11.

 

Use the factory-provided CleanMate battery and charger.

12.

 

When your hands are wet, do not touch the battery charger,

 

plug or power 

cord.

13.

 

When you need to clean this product, turn it off; unplug the charger, and 

remove the battery.

1.

 

This product is a robotic vacuum

 

cleaner that utilizes high vacuum suction, 

two roller brushes on the bottom, a side brush for cleaning along walls and an 
ultraviolet light to help with disinfection. All of these features make this unit 
perfect for cleaning a wide variety of floor types, including ceramic tile, 
hardwood, vinyl and most carpets. As long as you have the Infinuvo Robotic 
Vacuum Cleaner, you have the most helpful house cleaning mate.

2.

 

The compact shape enables this unit to clean under beds, tables and other

    furniture that standard upright vacuums cannot get to.
3. Once

 

the CleanMate is turned on, it

 

will follow a five step repetitive 

movement

Special bounce, Spiral, Along Wall, "S

shape

and Polygonal

 

Spiral.

 

This wide variety of movement helps to ensure that the unit 

completely cleans a room.  

  2

Clean Mate 365

QQ-1

Special Features

Safety Instructions

4."MODE"button on the remote control allows you to select  a specific 

cleaning pattern for the CleanMate. By default the unit

 

operate in 

Automatic Mode (switches between all 5 patterns), but by using the 
"MODE" button on the remote, you can select a specific pattern in the 
following sequence: 1.Spiral 2.Special Bounce 3.Along Wall 4.'S' Shape 
5.Polygonal Spiral and back to A.Automatic.

    Note: when mode 4 "S" shape in use, if the CleanMate in 45 degree angle get 

into 90 degree wall corner and stuck in the corner, please use remote control 

    to switch other mode ( in auto mode the CleanMate will change other mode 
    automatically in 30 sec).
5.

 

Sensors at the front of the unit tell the CleanMate when it comes in contact 

with a wall or other obstacle, to back up, turn  and clean around the object.

6. Photo sensors on the underside of the front of the unit detect stairs, and other 

drop offs, to keep it from falling off the edge and damaging the unit or 
anything else.

7. A handle is built-in to the unit to make it easy to pick up and move the unit to 

a different  room.

Special Features

Along Wall

Polygonal Spiral

“S” Shape

Spiral

Special Bounce

     3

Cautions

CleanMate

   

     

   Do not look directly at the UV light.

         Do not touch the UV light bulb with bare hands. Natural skin oils will
         cause premature failure.
         Do not attempt to remove or replace the UV light. This light is a 
         permanent fixture and is not user-replaceable.         

         

F1

F2

F3

F4

F5

Summary of Contents for CleanMate QQ3 Series

















Reviews: