*Make sure to remove the insulation plastic sheet under remote
battery before using the remote for the first time.
Remote Functions
:
1. START button: Press START to begin the automatic cleaning of your
room.
2. STOP button: Press STOP to stop the operation of QQ3. You will hear a
long beep sound.
3. TIMER button: Press TIMER to change the cleaning time.
4. Direction buttons: FORWARD: when you press this button, QQ3 will move
forward until user press FORWARD again, or when it hits an obstacle.
RIGHT, LEFT and BACKWARD buttons: press these buttons to manually
drive the QQ3 unit to go to right, left or backward directions.
9
Clean Mate 365
QQ-1
Remote Control Functions
LCD Control Panel and Functions
1. Power Button: To turn on QQ3LT
2. Start Button: To start QQ3LT
3. Time and Mode Indicator: The numerical panel on QQ3LT will display the
st
running time & cleaning mode. When QQ3LT is powered on for the 1 time,
default running time is set to 90 minutes. User can change running time from 10
to 90 minutes in 10-minute intervals by pressing the TIMER button on remote
control unit.
4. Auto: Light up when the cleaning patterns are repeated automatically
5. UV: Light up when QQ3LT UV light is activated via remote control unit.
6. Start: Light up when QQ3LT started working
7. Sweep: Light up when the brush motor is turned on by starting QQ3LT; light
off when brush motor is turned off via remote control unit.
8. Battery indicator:
9. Error: Light up when battery over charging, motor overloading, and
wheel traction losing (lifted off ground, etc) for more than 3 seconds.
8
Clean Mate 365
QQ-1
QQ3-LT Control Panel
Battery indicator
Battery Status
Three Cells
Fully Charged
One Cell
Battery Low
Blinking
Charging
Battery Indicator
Auto mode
indicator
Ultraviolet
On Indicator
Brush Motor
Off Indicator
Error Indicator
Power Button
Start Button
Start
Time and Mode Indicator
Sweep On/Off
