25
General settings
The general settings include 10 settings, as follows:
y
NIC
y
NIC type
y
IP type
y
IP address
y
Subnet mask
y
Gateway
y
Mac address
y
Port
y
Auto DNS server
y
DNS server
The introduction of each option as follows:
(1)
NIC
One NIC available: 1
(2)
NIC type
It displays the NIC type of the DVR, and is not editable. The NIC
of the system is 10M/100M/1000M auto adaptive.
(3)
IP type
It has 3 options, static IP, dynamic IP, and PPPoE. The operation is
the same with NIC.
(4)
IP address
When the cursor moves to this filed, and press
Ǐ
ENT
ǐ
key, and the
editing box becomes input status, and input related value, and press
Ǐ
ENT
ǐ
key.
Note
: Please add new server in the client end if change the IP
address.
(5)
Subnet mask
The operation is the same with IP address.
(6)
Gateway
The operation is the same with IP address.
(7)
Mac address
It displays the Mac address of the DVR.
(8)
Port
The parameter is not settable, default is 202.
(9)
Auto DNS server
It is selectable when the IP type is dynamic IP. The IP of DNS
server will be captured automatically when enable this option.
(10)
DNS server
The operation is the same with IP address.
Advanced settings
The advanced settings include 6 options, as follows:
y
HTTP port
y
SNMP port
y
Alarm center
y
Alarm port
y
NAS IP
y
NAS path
The introduction of each option is shown as follows
(1)
HTTP port
This parameter is not settable, the default value is 80.
(2)
SNMP port
This parameter is not settable, the default value is 161.
(3)
Alarm center
This setting is to set the IP address of alarm center. When the cursor
moves to this filed, and press
Ǐ
ENT
ǐ
key, and the editing box
becomes input status, and input related value, and press
Ǐ
ENT
ǐ
key.
(4)
Alarm port
This parameter is not settable, the default value is 6791.
(5)
NAS IP address
This setting is reserved.
(6)
NAS path
This setting is reserved.
5.3 Serial Port Settings
In the main menu, press
Ǐ
MENU
ǐ
key to enter the interface as
shown in Figure 5-1. Select "PTZ/COM" and press
Ǐ
ENT
ǐ
key to
enter PTZ/COM setting interface, as shown in Figure 5-5. Press
number key
Ǐ
7
ǐ
also can enter the setting interface in the interface
shown in Figure 5-1. Press
Ǐ
WIDE
ǐ
key to switch to serial port
settings as shown in Figure 5-6.
Figure 5-5
Figure 5-6
The settings include 5 options, as follows:
y
Baud rate
Summary of Contents for V3060 Series
Page 6: ......
