Infinova V3060 Series, Installation & Operation Instructions

Page: 17 / 38

11
Chapter 3 System Menu Introduction
Note : V3060 series DVR could be operated through front panel,
USB mouse, V2117/V2111 keyboard and remote controller. For
mouse operation, there's no introduction here for it is same as
windows system. This manual mainly focus on the introducing the
operation via front panel.
3.1 Menu Operation
V3060 series DVR has three levels of menu. The first level of menu
is shown in Figure 3-1.
Figure 3-1
Change the options by Ǐ ǐ Ǐ ǐ Ǐ ǐ Ǐ ǐ keys in front panel.
The icon will be highlighted when it's selected. For example, the
"Alarm" icon is selected, and it becomes bigger with light blue
shadow at two sides, as shown in Figure 3-2.
Figure 3-2
Press
Ǐ
ENT
ǐ
key or corresponding number key to enter the
submenu when a menu icon is selected. For example, "Channel"
icon is selected, press the
Ǐ
ENT
ǐ
key or
Ǐ
1
ǐ
key to enter the
submenu of "Channel", as shown in Figure 3-3.
Figure 3-3
Every menu has many operations, below section will have detailed
introduction on operation of common use control and input method.
3.1.1 Cursor Switching
The cursor can be switched via
Ǐ
WIDE
ǐ
,
Ǐ ǐ
,
Ǐ ǐ
,
Ǐ ǐ
and
Ǐ ǐ
keys, as shown in Figure 3-3.
User could switch the options via
Ǐ
WIDE
ǐ
key. For example, user
could switch among "General Settings" and "Advanced Settings" in
the interface as shown in Figure 3-3.
User can select the related parameters by
Ǐ ǐ
,
Ǐ ǐ
,
Ǐ ǐ
and
Ǐ ǐ
keys after enter to "General Settings". After selecting
"Channel" parameter, user can press
Ǐ
ENT
ǐ
key to call out the
drop-down list to select the desired parameter, as shown in Figure
3-5. Press
Ǐ
ENT
ǐ
key to confirm the selection. Then press
Ǐ ǐ
,
Ǐ ǐ
,
Ǐ ǐ
and
Ǐ ǐ
keys to the next parameter in the interface.
3.1.2 Option Box
A "
9
" in the option box indicates the option is selected. Move the
cursor to the desired option via
Ǐ ǐ
,
Ǐ ǐ
,
Ǐ ǐ
and
Ǐ ǐ
keys, then press
Ǐ
ENT
ǐ
to select it, and it cancel the selection if the
option is selected when press
Ǐ
ENT
ǐ
key. For example, the cursor
moves to "Video Loss Alarm" option, press
Ǐ
ENT
ǐ
key to select or
cancel selection, as shown in Figure 3-4.
Figure 3-4