Infinova V3060 Series Installation & Operation Instructions Download

Page: 21 / 38

The default administrator user name is "admin" with the password
as "12345678", and the default langue is English.

The operating steps as follows:

Step:

Press

ENT

key to drop down user name list, move the

cursor to select the desired user name, and press

ENT

key.

Step:

Move the cursor to the editing box, and press

ENT

key

to enter editing status, then input the correct password, and then
press

ENT

key to login. If need to cancel the login, select "Exit"

and press

ENT

key.

Note

: The

IRIS+

key could be used to cancel the password input

if input a wrong password.
A prompt dialog box will pop up if the user name or password is
wrong. After press

ENT

key, the cursor will place at the "Login"

button, follow the steps above to login. The main menu will display
after login successfully, as shown in Figure 4-2.

Figure 4-2

4.2.2 User Authority

There're 12 operation authorities, as follows:
Network preview: Preview from client and network
Network playback: Playback from client and network
Local play: Playback recording file
View log: View log information
PTZ control: PTZ control
Alarm control: Alarm control
Parameters setting: Parameters setting includes display, time, image
parameters, channel, preview, recording, alarm input, output,
abnormity network and PTZ/COM settings
System management: Shutdown, reboot and upgrade system,
restore to factory setting
User management: User assignment (Administrator has user
management authority; the administrator can add and delete user
and modify user password. The common user can modify his
password only.)
Data management: Recording backup and hard disk management

When the user performs the above operations, he needs to input an
authorized user name and password, or he will fail to operate the
DVR or the control button is unavailable.

Note

: Please refer to section 5.4 for user authority setting.

4.3 Preview

The DVR's menu divides to parts follows:
(1)

Preview

(2)

Manual recording: press

REC

key to turn on the recording

status list

(3)

Playback: press

PLAY

key to turn on play interface

(4)

PTZ control: press

PTZ

key to start the PTZ control

From keys combination, user can enter and switch among different
menus.
The default menu is preview status. In preview status, user could
live view the image transmitted by front-end cameras.

4.3.1 Switch Preview Modes

Press

Ǐ⬄ǐ

key to switch the preview mode among 1, 4, 6, 8, 9, 10,

13, and 16 screens.

4.3.2 Preview Setting

In the preview status, press

key to enter main menu

interface, move the cursor to the icon "Preview", and then press

ENT

key to enter the preview setting interface. Or press

key to enter the interface.
Select the "monitor" drop-down list, press

ENT

key to open the

drop-down list, select monitor 1 or 2, and then press

ENT

key to

confirm.
From the drop-down list of "Video Preview", "On" and "Off" is
optional. Select the interval time of preview switching; Select "On"
or "Off" option from the "Alarm Preview" drop-down list, and
select the interval time of the preview switching in the same time.
Select the number of preview screen from "Preview Mode", and
select the channel to be displayed in the right list box.
Select "Save" after finishing setting, and then press

ENT

key to

confirm.

4.4 PTZ Control

Attention:

Before attempt to perform PTZ control, make sure the

RS-422 port of the DVR is connect with the RS-422 port of the
Pan/Tilt or dome.

In PTZ control status, the below keys could perform the operations
as follows: