Hydrogen leak detector Sensistor ISH2000 HySpeed
-
Operating Instructions
OP-Sensistor ISH2000 HySpeed-EN-201203
43
EN
10 Sensistor ISH2000 HySpeed specifications
Table 10-1. Power supply specifications.
Table 10-2. Input and output connections.
Table 10-3. Miscellaneous specifications.
Power
Sensistor ISH2000 HySpeed
AC mains voltage
-
AC mains current
-
Fuse
-
Nominal battery voltage
-
Operating time
-
Charging time
-
Power supply voltage
24 VDC
Power supply current
3 A max.
Input/output
Sensistor ISH2000 HySpeed
Power input connector
4 pin Phoenix MC 1.5/5.81 Series
Detachable screw terminal.
Probe control/Status port
25-pin D-sub female.
Minimum pulse length
40 ms
Input impedance
50 kohm
Input maximum range
-34 to +38 VDC
Input high
> 12.0 VDC
Input low
< 8.0 VDC
Output current
max 0.5 A/output, max 2.5 A total
Inductive loads
External clamp diodes recommended
Low state voltage
Max 1.5 VDC
Low state leakage current
Max 100 µA
Short circuit protection
Thermal and electronic
Output high
> (Supply voltage - 2.5 VDC)
Output low
< 1.5 VDC
Serial communication port connector
9-pol D-sub male
Serial communication port standard
RS232
Misc.
Sensistor
ISH2000 HySpeed
Protection (IEC529)
IP64 (front), IP32 (back)
Net weight
1.8 kg (4.0 lb)
