3
Setup
This section describes the high-level system setup.
3.1
System description
The default system consists of a number of ProMove-mini sensor nodes, the Basic Inertia Gate-
way and Inertia Studio (PC Software) for monitoring and logging the inertial data. The standard
setup is depicted in Figure 2. The sensor nodes communicate wirelessly with the gateway in
the 2.4 GHz ISM band. The gateway is connected through the mini-USB connector with a PC
that runs Inertia Studio.
Figure 2: Typical system setup
A system could also consist of a single ProMove-mini node, which can be connected either
through micro-USB or through Bluetooth to the PC running Inertia Studio.
C++ and Java SDKs are available for developing custom applications that interact with Inertia
devices. The SDKs allow implementations on both desktop and mobile Android platforms.
Page 6 of 60
