Industrial Scientific RGX Series, Product Manual

Page: 28 / 62

18
The values noted below, unique to each RGX, are required for setup.
Side (right) Case base
Serial number (S/N)
Required for unit activation.
Activation code
Required for unit activation.
MAC addresses (on label)
Required for Ethernet configuration and permanent
installations.
IP Address
Note: If the value is unknown to you, see your
network administrator who may need the unit's MAC
address. For some tasks, a default static IP is
supplied.
User name
The default value is RGXadmin (case sensitive).
Figure 3.1 Required setup values
Activation
RGX Gateway
Log into iNet® and follow this navigation.
•
Click on the Equipment tab.
•
Choose Activate New Equipment .
•
In the appropriate fields, enter the unit's Serial Number and Activation Code .
•
Use the OK button to submit the information.
Note : When an RGX has not yet been activated, or when deactivated, the power button light will slowly blink red. See Table 3.6
Power-button light indicators for more information. In this state the RGX cannot connect to iNet to relay instrument events.
Gas-detection instruments
To transmit gas-detection instrument data wirelessly from instrument to RGX to iNet and onto the users of
iNet Now, the instruments must be activated for live monitoring. The following are required.
•
Access to iNet.
•
The Serial Number (S/N) for each instrument to be monitored.
Log into iNet and follow this navigation.
•
Click on the iNet Now tab.
•
Choose iNet Now Activations .
•
Use the serial number search box to locate an instrument.
•
An item’s Activated check-mark box indicates an instrument is activated for live monitoring.