8
8
File Menu
Open File—
open setup
fi
le that has been previously saved to the computer.
Save File—
save current setup
fi
le to computer. This op on saves the current setup data from the Nitrous Power
Controller so ware. It does not save the setup data from the controller to the computer.
Save As—
save current setup
fi
le to computer with the op on to save as a copy with a di
ff
erent name.
Exit—
Exit and close the Nitrous Power Controller so ware.
Controller Menu
Important—
the controller must be connected to the computer with the USB cable and the controller must be
powered up to use the following menu selec ons. Only the Sw12V power (key on) needs to be on for
USB communica on, the arming switch should be in the o
ff
posi on.
Always allow the progress bar in the lower le corner to complete a er star ng a download or upload to the
controller.
Download Setup from Controller—
read setup data from the controller to the Nitrous Power Controller so
‐
ware. Note—a er downloading the setup data from the controller you may use the File Menu, Save File selec
‐
on to save the setup data to a
fi
le on the computer.
Upload Setup to Controller—
write current setup data from the Nitrous Power Controller so ware to the con
‐
troller. Note—to load a saved setup
fi
le from the computer to the controller,
fi
rst use File Menu, Open File to
load the
fi
le. A er opening the
fi
le use this selec on to write the setup to the controller.
Download Data Log from Controller—
read data log informa on from the controller. This selec on will read the
most recent data log informa on from the controller. Note—the controller will retain the last data logged even
if the controller is powered o
ff
.
Update Controller Firmware—
load a new
fi
rmware image
fi
le into the controller. The
fi
rmware is the opera ng
system for the controller. When a new and/or updated version is released that has addi onal features, or a
fi
x
for an unforeseen issue, this selec on is used to apply the update to the controller.
