Index C200-sl Operating Instructions And Maintenance Instructions Download Page 59

Page: 59 / 102

C510

- Check backup data carrier

Orientation

If data from the control is lost, the backup CD/DVD always provides the ability to

quickly restore the operation of the machine.

Therefore, regularly checking this data carrier is essential.

Procedure

1. Check the existing backup data carrier for readability. Insert the data carrier

into the appropriate drive of a standard PC.

If the data carrier is not recognized, it is damaged. To create a

new backup data carrier, contact the machine manufacturer.

If the data carrier is recognized, make a copy to the hard disk. Create a folder

named “Backup Copy” at a suitable location in the directory tree.

3. Copy the entire contents of the backup data carrier to this folder. If the copying

process finished without displaying an error message, the data carrier is fine.

4. Delete the folder on your hard disk.

Maintenance Summary - 2.000 Operating hours

Maintenance Instructions

G220

DIE017EN - 05.06.2019

Summary of Contents for C200-sl







































































































Search results

Summary of Contents for C200-sl

Reviews:

Related manuals for C200-sl

Brands by name

Popular brands

Index C200-sl, Operating Instructions And Maintenance Instructions

Search results

Summary of Contents for C200-sl

Reviews:

Related manuals for C200-sl

Brands by name

Popular brands