Index C200-sl Operating Instructions And Maintenance Instructions Download Page 38

Page: 38 / 102

Maintenance Summary - 2.000 Operating hours

It is recommended to document the maintenance activities carried out by using the appropriate

maintenance log. The maintenance log has the document number DIE018EN - 05.06.2019.

C010

- Check maintenance logs of servicing activities

C035

- Check work area door (optionally with electr. drive) and viewing glass

C047

- Check tool clamping sets of the milling spindles (from Berg)

C050

- Checking and potentially replacing the cooling lubricant adapter (HSK tool mountings)

C065

- Check telescopic covers and wipers

C070

- Check outer wipers of linear guides

C080

- Check all electrical connections and drive belts of the drive motors

C130

- Replace filter on air conditioner cooling fan

C140

- Check cooling unit for cooling lubricant

C155

- Check coolant

C190

- Clean labyrinth rings of spindles

C510

- Check backup data carrier

C525

- Check control cabinet

C555

- Replace hydraulic fluid filters

C570

- Wassermann tool change system

Maintenance Summary - 2.000 Operating hours

Maintenance Instructions

G220

DIE017EN - 05.06.2019

Summary of Contents for C200-sl







































































































Search results

Summary of Contents for C200-sl

Reviews:

Related manuals for C200-sl

Brands by name

Popular brands

Index C200-sl, Operating Instructions And Maintenance Instructions

Search results

Summary of Contents for C200-sl

Reviews:

Related manuals for C200-sl

Brands by name

Popular brands