Index C200-sl Operating Instructions And Maintenance Instructions Download Page 35

Page: 35 / 102

A280

- Clean labyrinth ring of spindles

Orientation

When machining short-chipping materials such as brass, cast iron, or

in case of residues from the grinding, the work area must be cleaned

more frequently due to the special nature of the contamination.

Depending on the duration of use, usage profile of the machine and

different environmental conditions, it is necessary in particular to

remove and clean the labyrinth rings.

Procedure

1. Loosen and remove the screws on the labyrinth ring (X) of the spindle. The

number of screws that are necessary to fasten the labyrinth ring may differ

depending on the type of machine.

Example: (X) Labyrinth ring on the main spindle G200

Remove the labyrinth ring.

3. Clean the labyrinth ring. Clean the free space behind the labyrinth ring by hand

with a cloth.

4. Reinstall the labyrinth ring and tighten the screws to the proper torque.

Maintenance Summary - Care activities

Maintenance Instructions

G220

DIE017EN - 05.06.2019

Summary of Contents for C200-sl







































































































Search results

Summary of Contents for C200-sl

Reviews:

Related manuals for C200-sl

Brands by name

Popular brands

Index C200-sl, Operating Instructions And Maintenance Instructions

Search results

Summary of Contents for C200-sl

Reviews:

Related manuals for C200-sl

Brands by name

Popular brands