Cleaning and Maintenance
62
Assembling the Nozzle
[Note]
●
If the nozzle retracts to its original position,
perform steps 2 to 5 of “Removing the nozzle”
to expose the nozzle.
●
Do not damage the O-ring of the nozzle. Water
leakage may occur.
Align the right corner of the nozzle tip
with the left corner of the nozzle. Insert
the nozzle tip and rotate the tip clockwise,
as shown in the diagram below.
[Note]
●
Improper alignment of the nozzle and tip may
cause failures. In addition, the angle of the
water spray may change.
Insert
Turn clockwise
Left corner of
the nozzle
O-ring
Right corner of the
nozzle tip
Press the STOP button to return the
nozzle to its original position.
Check the alignment.
* Check that the corner of the nozzle is aligned
with the corner of the nozzle tip, as shown in
the diagram below.
Engaged point
Corner of
the nozzle
Corner of the
nozzle tip
Align the corners.
STOP
Summary of Contents for Regio DV-R115-VL-US
Page 47: ...Useful Functions 46...
Page 55: ...Cleaning and Maintenance 54...
Page 77: ...Troubleshooting 76...
Page 83: ...GCW 1205A US 11040...
