Inax Regio DV-R115-VL-US, User Manual

Page: 18 / 83

Operation
17
Preparation and Checks Before Use
STEP
4
STEP
5
STEP
6
STEP
7
● Press the WATER TEMP. button.
* The water temperature can be set to
one of six levels. At the lowest setting,
the water temperature is about 90 °F
(32 °C). At the highest setting, the water
temperature is about 104 °F (40 °C).
When the water heater is set to “OFF”,
the seat will be at room temperature.
● Press the SEAT TEMP. button.
* The seat temperature can be set to six
levels (“OFF (room temperature)” and
within a range from “Low (about 28 °C)” to
“High (about 40 °C)” as desired.
[Reference]
Upon initial startup, please allow some time for the water and the seat to be heated to the desired temperature.
Depending on the temperature desired, this may take about 10 minutes.
● This toilet is equipped with a “seat heater auto off” function that automatically turns off the seat heater when
the seat is occupied. This is done to prevent low temperature burns. However, the seat temperature can still
be set by the user during use of the product.
(
☞
See page 41.)
* Pressing the buttons alters the indications on the LCD.
Adjust the Water Temperature
STEP
4
Adjust the Seat Temperature
STEP
5
<Remote Control Unit - Secondary Panel>
<Sub-operation panel on the remote control>