background image

43

Specifications

Type

CW-RS3-W

Water supply method

Direct connection to tap water

Tap water pressure range

0.06 to 0.74 MPa (0.6 to 7.5 kgf/cm

2

)

Maximum rating

AC 220 V, 305 W, 50 Hz

Product dimensions

Width 426 mm x Depth 557.5 mm x Height 162 mm

Product weight

Approx. 4.0 kg

P

oster

ior and bidet cleaning

Warm water tank capacity

Warm water storage 0.88 L

Nozzles

Exclusive posterior, bidet nozzles, auto slide type

Nozzle holes

For posterior: 

φ

1.3 mm x 2 holes,  For bidet: 

φ

0.9 mm x 10 holes.

Posterior cleaning spray volume

0 to 0.9 L/min. (adjustable in 5 stages)

Bidet cleaning spray volume

0 to 0.9 L/min. (adjustable in 5 stages)

Warm water heater capacity

250 W

Warm water internal control temperature Off (water temp.), Low (approx. 36 °C), Middle (approx. 38 °C), High (Approx. 40 °C)

Safety devices

Thermal fuses, High temperature sensor switch,  Tank empty sensor circuit

Dr
ying

Air volume

0.3 m

3

/min.

Air heater capacity

200 W

Air temperature adjustment 

Low (room temp.), Middle, High

Safety device

Thermal fuses

T

oilet seat

Heater capacity

45  W

Surface temperature

Off (room temp.), Low (Approx. 28 °C), Middle (Approx. 36 °C), High (Approx. 40 °C)

Temperature adjustment

4-steps selectable (micro-computer controlled)

Safety device

Thermal fuse

Deodor

ization

Deodorizing method

Chemisorption using a deodorizing cartridge

Deodorizing capacity

0.11 m

3

 / min.

Deodorizing cartridge life

Approximately 7 years

Power save function

One-touch power save (auto recovery after 8 hours)

Power cord

Effective length: 1.0 m

Ambient operating temperatures

0 °C to 40 °C

Other functions

* Occupied seat sensor 

* Body sliding removal mechanism

* Toilet seat heater auto off

* Toilet seat/toilet seat lid slow-down

* Adjustable side-lined toilet seat

* Toilet seat lid one-touch removal 

mechanism 

* Power switch

* Included remote controller
* Posterior massage washing

This product is admitted to use only in your country. Do not use in any other countries.

CAUTION

GCW-1220-W-08110.indd   43

GCW-1220-W-08110.indd   43

2011/07/12   11:12:40

2011/07/12   11:12:40

Summary of Contents for CW-RS3-W













































Reviews: