Inax CW-RS3-W, Installation And Use Manual

Page: 13 / 44

13
4. Installation of the shower toilet
(1) Remove the existing
seat.
1) Remove the nuts from the
seat mounting bolts, the
slip washers, and rounded
packing.
2) Raise the seat and remove
it by lifting the seat mounting
bolts.
Seat mounting bolts
References
• Some toilet seats may require different methods
of removal that differ from our explanation.
• The removed toilet seat should be stored in your
home in case you remove the shower seat.
1) Insert the bushings into
the seat mounting holes.
2) Insert the mounting
brackets into the slide
plate and attach the slide
plate with the mounting
bolts on the seat.
(2) Attach the slide plate onto the seat.
1) Place the shower toilet on the toilet and align the ▽
mark on the slide plate with the
△
mark on the rear
section of the shower toilet.
2) Slightly raise the front side of the shower toilet, slide it
until the slide plate is fully inserted, and then press the
locking lever to secure the shower toilet.
(3) Attach the shower toilet.
CAUTION
• When use of the slide plate is not
necessary, please retain the slide
using the attaching screw included in
the installation kit to prevent it from
moving or becoming lost.
Rounded packing
Existing seat
Slip washer
Nut
Loosen
Bushings
Seat mounting holes
Mounting bolts for the toilet
Mounting brackets
Slide plate
1
2
Slide plate
Shower toilet
* For the attachment lacations of
the mounting brackets, please see
"Checking the toilet seat."
Caution
• When installing the shower
toilet, make sure to use the parts
provided in the installation kit.
Installation diagram
Toilet seat mounting guide holes
Shower toilet
Slide plate
Bushing
Mounting brackets
Seat mounting bolts
Slide plate
Attaching screw
GCW-1220-W-08110.indd 13 GCW-1220-W-08110.indd 13 2011/07/12 11:12:18 2011/07/12 11:12:18