1.3 LED Indicator
The LED indicators on BCST-10 can help the user know about the
current operation status.
COLOR OF LED INDICATOR
Green LED on and off quickly
Green LED on Every 5s
Purple, Flashing(On/Off ratio 1:1)
Blue, Flashing (On/Off ratio 1:1)
Blue, Flashing (On/Off ratio 20ms:3s)
Red, Flashing (On/Off ratio 1:1)
1.4 Beeper
The beeper built in BCST-10 can help the user know about the
current operation status.
BEEPING
One long beep, high tone
One short beep, high tone
One long beep, low tone
Two short beeps, high tone
Two short beeps, low-high tone
Two short beeps, high-low tone
MEANING
Good Read, with one short beep (high
tone)
Indicates the BCST-10 Scanner in Memory
Mode
Indicates the BCST-10 Scanner in Setting
mode
Indicates the BT is waiting for connection,
the BCST-10 stores the address of BT
which connects with the last time.
Indicates the BCST-10 Scanner is out of
range or can not establish connection with
BT, with two short beeps(high-low tone)
Indicates the BCST-10 Scanner establish a
BT connection successfully, with two short
beeps (low-high tone).
Indicates the BCST-10 Scanner reconnect
with BT, with two short beeps (low-high
tone).
Indicates the BCST-10 Scanner has no
address of BT which connects with before.
The default BT connect interface is HID,
the PIN code is 10010.
MEANING
Power on. If the scanner has no BT
address which could connect with, flashing
red. If the scanner has BT address which
could connect with, flashing blue.
Read barcode, with green LED on and off
quickly
Configuration error, with purple flashing;
Or transmit buffer full, with green LED on
and off quickly
Power off.
BT connection established, with blue LED
flashing (On/Off ratio 20ms:3s).
BT connection out of range or suspended,
with blue LED flashing (On/Off ratio 1:1).
17
Summary of Contents for BCST-10
