Inateck BCST-10 Instruction Manual Download Page 5

Page: 5 / 76

Overview of BCST-10 Barcode Scanner

Features of the Scanner

* Small size, portable.

* User feedback via LED indicator and beeper

* The voice volume of scan barcode successfully could change via

setting barcode.

* Built-in 256 KB Flash memory can store up to thousand scan

barcodes.

* Provides 2 KB memory for reserve buffer while Bluetooth

connection interrupt, can store up to 110 scan barcodes.

* Supports BT SPP.

* Supports BT HID.

★

Supports a wide range of barcode types. FedEx and USPS

barcodes are all supported.

★

Whole body shockproof and drop resistance design

★

Proprietary intellectual property rights

★

Comfortable operating feel

★

Button life up to 3 million times

★

Support BT standard protocol, no need adaptor

★

1500mAh large capacity lithium battery

★

Long working hours

★

The maximum readable digit extend to 64-bit. BCST-10 both wired

and wireless mode support 64bit readable

★

Prefix and suffix are allowed to be added. Reset to factory default

settings by scanning the “Factory Reset” barcode.

Appearance

Power

USB port

Bluetooth Wireless mode

USB Wired mode

Scan Window

Summary of Contents for BCST-10













































































Search results

Summary of Contents for BCST-10

Reviews:

Related manuals for BCST-10

Brands by name

Popular brands

Inateck BCST-10, Instruction Manual

Search results

Summary of Contents for BCST-10

Reviews:

Related manuals for BCST-10

Brands by name

Popular brands