1.1 Battery
The scanner is powered by 1500mAh chargeable Lithium batteries.
The batteries can support the scanner work continuous for 60 hours,
or read 56000 barcodes (read an EAN-13 barcode per 5s).
1.1.1 Mounting the battery (charging)
1. Hold the scanner face down in one hand.
2. Insert USB cable for charging.
1.1.2 How to operate BCST-10 Barcode Scanner
Turn on the scanner
Press the Power key for about 2 seconds. The scanner will respond
with a long beep (high tone), and its LED indicator is flashing.
Turn off the scanner
Press the Power key for about 3 seconds. The scanner will respond
with two short beeps (high tone) and the LED indicator is turn off.
1.1.3 Auto Power Off
In order to conserve battery power, the user can specify the time
interval for the scanner to automatically turn off. By default, it is set
to 10 minutes.
Enter Auto Power Off
5min
(*)10min
20min
30min
13
Summary of Contents for BCST-10
