In-situ Level TROLL 400, Operator'S Manual, Page: 49 / 85

1-800-446-7488 49 www.in-situ.com
Pending —Scheduled start log is ready to start at its programmed time, or when you click the Start button.
Running —The log is actively logging data.
Suspended —The log has been paused (stopped temporarily).
Stopped —The log has been stopped, either manually or on a schedule.
Deleted —The log has been marked for deletion and will be deleted from the instrument when memory is needed. The
software manages this automatically.
Invalid —The log as programmed cannot be run.
Ready
,
Pending
,
Running
, and
Suspended
logs are considered active. Only one log can
be active in the instrument.
Log Control Buttons
You can control the status of a log by selecting the log and clicking the appropriate button in the Logging tab control panel:
The Start button starts a Ready or Pending log, or resumes a Suspended log.
The Pause button pauses a Running log allowing you the option to resume it.
The Restart button restarts the selected Running log from the beginning. This can be useful during aquifer testing using
a logarithmic data collection schedule.
The Stop button permanently stops the selected Running log.
Log Operations
Use the buttons in the control panel to perform the following actions:
Create a new log.
The New button is disabled if a Ready, Pending, Running, or Suspended log is on the instrument. When the instrument
contains its maximum number of logs, the New button is unavailable.
Edit (or review) the log configuration for a Ready, Pending, or Invalid log.
Delete the log. (Note that you must delete a log twice before it is permanently removed.)
Download the log to a PC.