In-situ Level TROLL 400, Operator'S Manual, Page: 23 / 85

1-800-446-7488 23 www.in-situ.com
l
Avoid full discharges and charge the battery more often between uses.
l
Avoid storing the communication device in a high temperature (above 86° F / 30° C) area.
Connecting to a Wireless TROLL Com
A Wireless TROLL Com can be used to connect the instrument to software if the sonde is deployed on a cable.
1. Turn on the Wireless TROLL Com.
2. Make sure the cable is connected to the instrument as well as the communication device.
3. Go to Bluetooth settings on your mobile device or computer.
4. From the Bluetooth section, search for devices.
5. Tap or click the serial number of the communication device to pair the device with the phone or computer. The
serial number is located under the USB flap.
Connecting to VuSitu
1. Open the VuSitu Mobile App. If you have correctly paired your Wireless TROLL Com with your wireless device,
and the instrument is available, the software will connect and display readings.
If the Searching screen continues to show, tap "Choose another device" and select the device
you are trying to connect to.
Connecting to Win-Situ 5
1. Open Win-Situ 5 Software.
2. When prompted, "Connect to device now?" click No .
3. Plug the USB charging cable into the computer and Wireless TROLL Com.
4. Click Preferences , then click Comm Settings .
5. Select the correct Com port used by the charging cable, then select the communication settings for the instrument
you are connecting. The following default communication settings are most common for In-Situ instruments:
l
Baud: 19200
l
Data Bits: 8
l
Parity Bits: Even
l
Stop Bits: 1
l
Device Address: 1
l
Mode: Modbus-RTU
If you cannot connect using these settings, click the "Search for Devices" or "Reset All Devices" button.
6. Click the checkmark, then click the Connect button in the lower right hand corner.