In-situ Level TROLL 400, Operator'S Manual, Page: 48 / 85

1-800-446-7488 48 www.in-situ.com
Logging Tab
The Logging tab displays a list of logs in the instrument. When you click the Logging tab, it may take a moment for the
software to retrieve information from the instrument.
Log Information
Columns across the Logging screen show information about the logs in the instrument.
l
Symbol —This is a graphic representation of the information in the Status column.
l
Site —The site that was specified when the log was configured.
l
Log Name —The name that was entered when the log was configured.
l
Type —The logging method that was selected when the log was configured.
l
Start Time —For a Pending log, the scheduled start time is shown. For a Ready log that has not yet started, this
column displays “Manual.” For a Running or Stopped log, the actual start time is shown.
l
Scheduled Stop Time —For a log with a scheduled stop, the scheduled stop time is shown. For a log without a
scheduled stop time, this column is blank.
l
Stop Time —For a Pending or Ready log, this column is blank. For a Running log, the time of the last data point is
shown. For a Stopped log, the actual stop time is shown.
l
Status —Each log has a specific status. See Log Status for details.
l
Used Size —Kilobytes of instrument memory allocated for this log. For a Pending or Ready log, the current size of
the log configuration is shown. For a Completed log, the size of the entire log file is shown. For a Running log, the
current size of the log up to the last data point is shown.
Log Status
The status of each log in the instrument is displayed in the Logging tab by a symbol beside the log name, and in the Status
column.
Ready —Manual Start log is ready to start.