Speedway Revolution Installation and Operations Guide Octane 4.8
Appendix A: Region Specific Information
Copyright © 2011, Impinj, Inc.
37
Approved Antennas
Consult with your registered reseller or Impinj provider for guidance on antenna selection for your region
•
Laird Technologies model number S9028PCL/R (left- or right-hand CP), with
integrated 8 foot pigtail to RP-TNC male connector; 6 dBi composite gain
•
Impinj model number IPJ-A0301-USA (Mini-Guardrail) with SMA female connector; -
15 dBi gain
•
Impinj model number IPJ-A0310-USA (Threshold-T Antenna) with 12 inch integrated
pigtail to BNC male connector, 6 dBi composite gain.
•
Impinj model number IPJ-A0400-USA, CSL CS-777-2 (Brickyard) with 7 foot
integrated pigtail to RP-TNC male connector; 2 dBi composite gain
•
Impinj model number IPJ-A0401-USA or IPJ-A0402-USA (both Guardwall) with 6 foot
integrated pigtail to RP-TNC male connector; 6 dBi composite gain
•
Impinj model number IPJ-A0404-000, Matchbox antenna with 20cm integrated
pigtall to SMA connector; -20 dBi composite gain.
•
MA/COM MAAN-000246-FL1 integrated RFID floor-mounted stand (multiple con-
figurations available, 2 or 4 antennas left-hand and right-hand CP) with 8 foot
integrated pigtail to RP-TNC male connector; 6 dBi composite gain
•
MA/COM MAAN-000246-WL1 integrated RFID wall-mounted stand (multiple con-
figurations available, 2 antennas left-hand and right-hand CP) with 8 foot integrated
pigtail to RP-TNC male connector; 6 dBi composite gain
•
MTI MT-262006/TLH (left-hand CP) or MT-262006/TRH (right-hand CP) with RP- TNC
female connector (antennas available in IP54 or IP67 ratings); 6 dBi gain
•
MTI MT-262013/NLH (left-hand CP) or MT-262013/NRH (right-hand CP) with N- type
female connector (antennas available in IP54 or IP67 ratings); 4.5 dBi gain
•
MTI MT-262013/TLH (left-hand CP) or MT-262013/TRH (right-hand CP) with RP- TNC
female connector (antennas available in IP54 or IP67 ratings); 4.5 dBi gain
•
Sensormatic Electronics Corp. model number IDANT20TNA25 with 25 foot Belden
7806A RG-58 coaxial cable (0.1 dB per foot loss) to RP-TNC male connector; 5.5 dBi
composite gain
•
Sensormatic Electronics Corp. model number IDANT10CNA25 with 25 foot Belden
7806A coaxial cable (0.1 dB per foot loss) to RP-TNC male connector; 3.5 dBi
composite gain
•
Sensormatic Electronics Corp. model number IDANT10CNA25 with 6 foot Belden
7806A coaxial cable (0.1 dB per foot loss) to RP-TNC male connector; 5.4 dBi
composite gain
Warning
: The use of any antenna not listed above may damage the reader or
adversely affect performance.
Frequency Plans
The GX1 reader operates over a subset of the FCC North American spectrum (902–928 MHz,
with specific frequency and channel usage dictated by regulations of each country.
Frequency hopping spread spectrum (FHSS) is used, with the exception of Israeli where
only a single channel is available. The specific frequency plans by country are listed in the
tables that follow.
