Speedway Revolution Installation and Operations Guide Octane 4.8
ii
Copyright © 2011, Impinj, Inc
Industry Canada (IC) Compliance
Operation is subject to the following two conditions:
1.
This device may not cause interference.
2.
This device must accept any interference, including interference that may cause
undesired operation of the device.
This device has been designed to operate with the
antenna(s)
listed on page 34 that have a
maximum gain of 6 dB. Antennas not included in this list or having a gain greater than 6 dB
are strictly prohibited for use with this device. The required antenna impedance is 50 ohms.
To reduce potential radio interference to other users, the antenna type and its gain should
be chosen so that the equivalent isotropically radiated power (EIRP) is not more than that
permitted for successful communication. The term “IC” before the radio certification number
only signifies that Industry of Canada technical specifications were met.
CE Marking and European Economic Area (EEA)
RFID devices designed for use throughout the EEA must have a maximum radiated transmit
power of 2W ERP in the frequency range of 865.6–867.6 MHz. For other EEA restrictions on
RFID device use, please refer to the Impinj Declaration of Conformity (DoC) located at
support.impinj.com
.
Before You Begin
Warning:
Please read this document in its entirety before operating the Speedway
Revolution Reader, as serious personal injury or equipment damage may result from
improper use. Unauthorized opening of the Speedway Revolution Reader enclosure voids the
warranty. To safeguard personnel, be sure to position all antenna(s) according to the
specified requirements for your regulatory region. For details, see Appendix A:
Information
Specific to Regions of Operation
on page 33.
