Tiger CCD Cameras with Camera Link
– User Manual
November 27, 2017
Page
47
of
86
Rev 1.0
can instruct the camera to load its workspace with the contents of the factory-space, user
space #1, user space #2, user space #3, or user space #4. Similarly, you can instruct the
camera to save the current workspace settings to user space #1, user space #2, user space
#3, or user space #4).
The non-volatile parameter flash memory also contains the following image enhancement
tools:
•
Bad Pixel Map (BPM 1 and BPM 2)
•
Flat Field Correction Coefficients (FFC1, and FFC2)
•
LUT 1, LUT 2, LUT 3 and LUT 4
You can use these image enhancement files loaded by the factory or you can create your
own BPM, FFC, and LUT tables and upload them to the parameter flash memory using the
Camera Configurator graphical user interface.
3.4.2 Menu Options
The Menu provides access to load options, settings, the command terminal, and more.
Figure 39: Main window menu options.
The status indicator next to the camera name turns red if the connection between the
camera and host computer is lost.
3.4.2.1 Run Application
This menu starts any executable file that you normally use, such as a frame-grabber
application. CamConfig remembers the path of the last opened file.
3.4.2.2 Load From . . .
This menu option loads camera registers from a saved configuration space. Load options
are:
•
File
- Loads camera registers from a saved configuration file.
