Tiger CCD Cameras with Camera Link
– User Manual
November 27, 2017
Page
20
of
86
Rev 1.0
Single Mini (or Micro) USB
connector
USB type B Factory programming connector (factory use
only).
LED
Provides camera status information (Table 11).
Table 9: Camera connectors and LED status indicator.
2.1.1 Pin Assignments
The male 12-pin Hirose connector provides power and all external input/output signals
supplied to the camera (Figure 3).
Figure 3: Connector Pin-outs.
The Hirose connector on the camera
’s
back panel is a male type miniature locking
receptacle #HR10A-10R-12PB(71). The Imperx power supply (sold separately) terminates
in a female HIROSE type miniature locking receptacle #HR10A-10P-12S(73) and has two
small BNC pig-tail cables for the external trigger input (black) and strobe output (white)
(Table 10).
Pin
Signal Name
Use
1
+12 VDC Return
12 VDC Main Power Return
2
+12 VDC
12 VDC Main Power
3
Reserved
Second RS232-RX
4
Reserved
Second RS232-TX
5
OUT2 RTN
General Purpose Output 2, Contact 1 (OPTO-isolated)
6
OUT1 RTN
General Purpose Output 1 Return (TTL)
7
OUT1
General Purpose Output 1 (TTL)
8
IN1
General Purpose Input 1 (Opto-isolated)
9
IN2
General Purpose Input 2 (TTL)
10
IN1 RTN
General Purpose Input 1 Return (Opto-isolated)
11
IN2 TTL RTN
General Purpose Input 2 Return (TTL)
12
OUT2
General Purpose Output 2, Contact 2 (OPTO-isolated)
Table 10: Hirose connector pin assignments.
