Tiger CCD Cameras with Camera Link
– User Manual
November 27, 2017
Page
26
of
86
Rev 1.0
2.3 Cable Assembly
Both Camera Link Full/Deca and Camera Link Medium camera connections use dual cables
with 26-pin connectors. The maximum recommended Camera Link cable length is 10
meters.
Figure 13: CLM-T6640 camera cabling to
computer’s
frame grabber.
Be sure to connect each cable from the frame grabber channel to its corresponding
connector (Base, Medium, or Full) on the back of the camera. If video does not appear
after making your connections, try swapping the cables.
2.4 Mechanical Drawings
The camera housing is made of high quality 6000 series aluminum construction. For
maximum flexibility, the camera has eight M3X0.5mm mounting holes located near the
front and the back.
A fan is available for providing additional cooling to the cameras. The fan adds about 7mm
to the camera height (Y-Dimension). The bottom of the camera will include a serviceable
filter assembly. A 10mm gap should be provided for airflow into the bottom portion of the
camera. Refer to 2.8 Forced Air Cooling for Industrial Versions.
2.4.1 Large Tiger Cameras
The following mechanical drawings show side, front, and back views of the Camera Link
(CL) large Tiger camera (T8810, T8820).
