Tiger CCD Cameras with Camera Link
– User Manual
November 27, 2017
Page
19
of
86
Rev 1.0
2 Hardware
2.1 Camera Connectivity
Tiger cameras provide connectors for power and inputs/outputs, factory programming,
and two connectors for the Camera Link output interface.
Figure 1: Back panel of the Tiger CLM T6640 camera.
Figure 2: Back panel of the Tiger CLF T8820 camera.
The following table describes the connectors and LED status indicator on Tiger cameras.
Camera Connectors
Description
12-pin Hirose (male) Connector
Locking receptacle #HR10A-10R-12PB(71) providing power,
I/O interface, and Serial RS232/485 interface (Figure 3).
Camera Link Base
Camera output. Standard Base Camera Link Mini provides
data, sync, control, serial interface, and PoCL power.
Camera Link Medium/Full
Camera output. Standard Medium Camera Link Mini provides
data, sync, control, serial interface, and PoCL power.
Status LED
12-pin connector for power, I/O
Mini connector for factory use
Camera Link Base output connector
Camera Link Full output connector
Status LED
12-pin connector for power, I/O
Mini connector
for factory use
Camera Link Base output connector
Camera Link Medium/Full output connector
