BOBCAT Hardware User’s Manual
Imperx, Inc.
Rev. 2.0.6
6421 Congress Ave.
11/20/2012
Boca Raton, FL 33487
+1 (561) 989-0006
80 of 265
Figure 2.9 – PAOI enabled as processing ROI.
(All data within the selected ROI are processed with “One Point Correction”,
all data outside of the ROI are not processed)
CAUTION NOTE
1.
If the user needs to enable AOI1 to AOI6 MAOI
MUST
be enabled.
2.
To qualify the selected pixels/lines MAOI uses DVAL, where DVAL is high
within the selected MAOI. The frame-grabber horizontal and vertical resolutions
must be adjusted for each window size.
3.
When MAOI is enabled the “Number of Lines” selection is disabled. To change
the “Number of Lines”, please disable MAOI first, change the “Number of
Lines” and them enable MAOI again.
4.
Horizontal and vertical windows can be enabled in all camera modes, including
H & V binning. Refer to binning section for more information.
5.
The size of the horizontal window does not affect the camera frame rate, the
vertical window does, but only if “Keep Frame Rate” is not enabled.
6.
For dual tap mode of operation the horizontal Offset and Width must be even
number.
7.
For
B1920
the minimum “Horizontal Offset” is
10
pixels when “Constant Frame
Rate” is disabled, and
0
pixels when “Constant Frame Rate” is enabled.
8.
Positioning the horizontal and vertical window size outside the maximum image
window will result in an error.
9.
Color version
users – when MAOI is enabled, for proper color reconstruction
and WB „Offset X‟ and „Offset Y‟ must be an even number.