BOBCAT Hardware User’s Manual
Imperx, Inc.
Rev. 2.0.2
6421 Congress Ave.
11/20/2012
Boca Raton, FL 33487
+1 (561) 989-0006
220 of 265
5.7.11 Data Output
Data Output window provides full control of the camera digital data output – Figure
5.20.
Figure 5.20 – Data output window
Video Settings
: Sets the data format and camera speed. Refer to Chapter 2 for
more information.
Taps
– sets the number of image taps used in the current
configuration. These are CCD taps, not output taps. In some
camera the tap selection is not available:
1.
Single – only one CCD tap is used, the CCD has only one
tap, or one tap operation is available for dual tap CCDs.
2.
Dual – two taps CCD operation, the CCD must support dual
tap operation.
Format
– sets the output data format, i.e. the number of output
taps used and mapped to the camera link output. A graphical
visualization of the selected output data format is shown in the
center of the window:
1.
1 Tap Single – the output data is mapped to one tap only.
2.
2 Taps Interleaved – the output data is mapped to two taps in
interleaved order.
3.
2 Taps Sequential – the output data is mapped to two taps in
sequential order. This feature is optional.
Speed
– controls the camera speed and frame rate. All camera
features are available in both (Slow and Fast) modes.
1.
Normal – normal camera operation.
