BOBCAT HD-SDI
Hardware User’s Manual
Imperx, Inc.
Rev. 1.4
6421 Congress Ave.
6/2/2014
Boca Raton, FL 33487
+1 (561) 989-0006
28 of 175
1.4.
CAMERA CONNECTIVITY
1.4.1.
HD-SDI Output
The interface between the BOBCAT HD-SDI camera and outside equipment is
done via 3 connectors and one LED, located on the back panel of the camera –
Figure 1.8.
1.
Camera output – standard HD-SDI BNC output
2.
12-pin HiRose (male) connector provides Power and I/O interface.
3.
12-pin HiRose (female) connector provides Serial RS-232/485 interface
for controlling Camera features via the CamConfig GUI, and differential DC
outputs for Lens Control.
4.
USB type B programming
5.
Status LED – indicates the status of the camera – refer to Status LED
section.
6.
Serial Number – shows camera model and serial number.
Figure 1.8 – Camera back panel – HD-SDI output.
The male 12-pin Hirose connector provides power and all external input/output
signals supplied to the camera. Refer to Fig 1.9 for connector pin-outs. Refer to
Table 1.8 for corresponding pin mapping. The connector is a male HIROSE
type miniature locking receptacle #HR10A-10R-12PB(71).The camera’s power
cable (sold separately) terminates in a female HIROSE type miniature locking
receptacle #HR10A-10P-12S(73), and has two small BNC pig-tail cables for
