BOBCAT HD-SDI
Hardware User’s Manual
Imperx, Inc.
Rev. 1.4
6421 Congress Ave.
6/2/2014
Boca Raton, FL 33487
+1 (561) 989-0006
125 of 175
Analog:
The user can set the desired analog gain (0 to 36 dB, 1024
discrete values) and offset (0 to 1023, 1 step increment) for
each channel via the sliders or by entering the desired
values.
“Link Gain” and “Link Offset” links the corresponding
channels together (dual tap camera only), and the gain or
offset difference between them will be preserved.
Pre Amp Gain:
The user can select the preamplifier gain for the camera (the
same for both channels). 4 options are possible -3 dB, 0, +3
dB, and +6 dB. The default Pre Amp Gain value is camera
dependent and it is set for the best camera performance.
Digital:
The user can set the desired digital gain (1.0x to 3.0x, 0.1x
increment) and digital offset (-511 to +511, 1 step
increment) via the slider or by entering the desired value.
The selected value for gain or offset is applied to both
channels.
Load Defaults:
Loads the Manufacturing default gain and offset settings.
The settings might be different for “Slow” and “Fast”
modes.
Corrections:
Tap balance
– when selected enables automatic tap
balancing. Four options are available – Off, Auto, Once,
Static.
White balance
– when selected enables automatic white
balance. This feature is optional.
Black Comp
–
when selected enables “Black
Compensation” and automatically determines and
compensates for black level.
5.7.2.
I/O Control
The camera has 2 external outputs. The user can map all available internal
output signals to all external camera outputs – Figure 5.11.
Figure 5.11– I/O control parameter window.
