BOBCAT HD-SDI
Hardware User’s Manual
Imperx, Inc.
Rev. 1.4
6421 Congress Ave.
6/2/2014
Boca Raton, FL 33487
+1 (561) 989-0006
77 of 175
‘boot from’ value from non-volatile memory and loads the appropriate
configuration space.
Address
:
0x6000
Data (1- 0)
:
00 – Boot from Factory
01 – Boot from User #1
:
10 – Boot from User #2
Data (31- 2)
:
N/A
4.3.2.2.
Load From Factory
The
‘Load From Factory’
command instructs the camera to load its
workspace from the factory space. All current workspace settings will be
replaced with the contents of the factory space. This is a command, not a
register. The act of writing to this location initiates the load from the
factory.
Address
:
0x6060
4.3.2.3.
Load From User #1
The
‘Load From User #1’
command instructs the camera to load its
workspace from the user #1 space. All current workspace settings will be
replaced with the contents of the user #1 space. This is a command, not a
register. The act of writing to this location initiates the load from the user
#1.
Address
:
0x6064
4.3.2.4.
Load From User #2
The
‘Load From User #2’
command instructs the camera to load its
workspace from the user #2 space. All current workspace settings will be
replaced with the contents of the user #2 space. This is a command, not a
register. The act of writing to this location initiates the load from the user
#2.
Address
:
0x6068
4.3.2.5.
Load MFG Default Gain
The
‘Load MFG Default Gain’
command instructs the camera to load its
default gain and offset settings from the manufacturing space. Different
settings will be loaded for “slow” and “fast” camera speed. This is a
command, not a register. The act of writing to this location initiates the
load the default gain and offset settings.
Address
:
0x606C
4.3.2.6.
Save to User #1
The
‘Save To User #1’
command instructs the camera to save its
workspace to the user #1 space. All current workspace settings will be
saved to the user #1 space. This is a command, not a register. The act of
writing to this location initiates the save to user #1 space.
